faq
  • 2016-12
    According to the current situation in our country, sidewall belt conveyor is most commonly used in the conveying of coal mine, cement, chemical raw materials.
  • 2016-12
    As we all know, it is very important to debug the drag chain scraper conveyor after installing. This article will introduce how to debug the scraper chain conveyor
  • 2016-12
    1.When installation, must tension the screen mesh,because the screen tension degree are the important factors which influence the screening efficiency;
  • 2016-12
    Belt deviation is common fault during belt conveyor operation, which will cause severe wear and tearing of conveyor belt. The reasons of belt deviation are as follows:
  • 2016-12
    Now PK Machinery will continue to sum up the source of chain bucket lifter noise and solutions, please see the following: (8)Noise generated by bite between chain and sprocket wheel. This is for chain bucket elevator. In operation, there will be dislocation of chain and sprocket wheel when biting because of the loose chain; the chain will be deformation and damage increasing if you don’t pay attention for a long time.
  • 2016-12
    TB plate chain bucket elevator, which is widely used in power plant, coal, cement and other industries, usually lifts dry powdery material or granular material, therefore, inevitably the materials will be spilled or dust flied, these will lead to abnormal operation of chain bucket hoist and cause noise. Now PK Machinery summed up the source of chain bucket lifter noise and solutions, please check.
  • 2016-11
    TB plate chain bucket elevator, which is widely used in power plant, coal, cement and other industries, usually lifts dry powdery material or granular material, therefore, inevitably the materials will be spilled or dust flied, these will lead to abnormal operation of chain bucket hoist and cause noise. Now PK Machinery summed up the source of chain bucket lifter noise and solutions as follows.
  • 2016-11
    Bucket elevator is an important elevating equipment, however, there may appear belt deviation or chain dislocation situation after using for a period of time. So we need to adjust the bucket elevator tension system to adjust it. This article will introduce the adjustment method for the bucket elevator tension system.
  • 2016-11
    Selection principles and precautions of conveyor belt Sway Switch: (1) Choose two or more level belt sway switch preferably, you can detect the degree of deviation conveyor belt; it will provide more information to the control system.
  • 2016-11
    1. Counterweight device of belt conveyor The depth of parallelism and perpendicularity of two uprights should be ensured during the installation of counterweight device. Moreover, the security should be taken into consideration after installation, so the protective railings should be installed immediately.
 695   Home Previous 10 11 12 13 14 15 16 17 18 19 20 21 Next Last