faq
  • 2014-08
    Nowadays, vibrating screen is widely used in industrial area. The main concern of the vibrating screen is the screening efficiency. This is because, the better the screening efficiency, the higher the productivity. How are we going to improve the screening efficiency of a vibrating screen?
  • 2014-08
    Anti-blocking screening mesh is unique design mesh. The ultrasonic vibration is installed on the screening mesh. The ultrasonic vibration will accelerate ultrafine powder sieving. It inhibits the theory of adhesion, friction and wedge blocking mesh factors in the design. Anti-blocking screening mesh is able to improve the screening efficiency and mesh cleaning efficiency.
  • 2014-08
    Commonly, aluminium powder is known as silver powder. It is made up of silver metallic pigments where a small amount of lubricants is added to pure aluminium foil and then crushed into powder. The powder been polished to become aluminium powder. Aluminium powder is light, floatable, hiding ability, good heat and light reflector. When the aluminium powder is processed, it is non-floatable. The aluminium powder can be used to identify fingerprints and manufacturing fireworks. Aluminium powder has wide application and huge market demands. It is one of the large classes in metallic pigment and has
  • 2014-08
    When purchasing a dye vibrating screen, customers needed to understand the nature of materials, sizes of materials, structure, density, moisture content and temperature of materials. Besides, customers also need to know the purposes of purchasing are to remove impurities, grading, sorting or filtering.
  • 2014-08
    Precautions during the Installation of Screening Mesh on Linear Vibrating Screen
  • 2014-08
    The working efficiency of vibrating screen refers to the screening efficiency and the productivity. Hence, there are two reasons why the screening efficiency is affected when the screening machine is working 1. The properties of the materials are the major reason why the screening efficiency of the vibrating screen is affected. For example the size composition, moisture content and the clay content of the materials. When the fines content of the materials is large in quantity, the productivity will be higher. When the moisture content of the materials is high, the screening efficiency will
  • 2014-08
    General Considerations 1. To minimize both deflections and stresses, the shaft length should be kept as short as possible and overhangs minimized. 2. A cantilever beam will have a larger deflection than a simply supported (straddle mounted) one for the same length, load, and cross section, so straddle mounting should be used unless a cantilever shaft is dictated by design constraints. (Figure 1 shows a situation in which an overhung section is required for serviceability.) 3. A hollow shaft has a better stiffness/mass ratio (specific stiffness) and higher natural frequencies than a comparab
  • 2014-08
    Vibrating screen, Which is depended on vibrating force generated by vibration motor or vibration exciter at runtime for driving mush to vibrate in horizontal, vertical and inclined multi-directional tilt rotary movement, the purpose of screening material. By changing different pore size and area of the screen can be adjusted screening accuracy and efficiency. Depending on the material trajectory, vibrating screen is divided into plane rotary screen, vibrating sieve, drum sieve, vibration sieve, circular vibrating screen, drum screen, dewatering screen, vibrating feeder, vibrating platforms. Me
  • 2014-02
    The initial step in engineering a screw conveyor is to analyze the material being handled anf as certain its physical properties in order that they may be thoroughly evaluated and understood prior to proceeding with the conveyor sizing and selection. The properties of the materials are discussed in further depth below.