faq

Installation Details of Belt Conveyor Roller

2016-10-22


1.Installation details of belt conveyor roller 
1.1 Belt conveyor roller assembly shall meet the following requirements
1.1.1 Roller horizontal centerline and longitudinal center line of conveyor should overlap,the deviation shall not be greater than 3 mm ;
1.1.2 For the roller of not self-aligning or not transition,  the surface of roller should be located on the same plane or on the sameradius of curve,and the relative elevation difference of the conveyor roller surface among adjacent three groups rollers  should not be greater than 2 mm ;
1.1.3 After roller assembly, its rotation should be flexible . 
Hope above mentioned are helpful,as a professional bulk material handling equipment manufacturer,PK Machinery always provide superior product and considerate service to our client,further information,please click:www.pkmachienry.com