faq

The Installation Location Determination and Adjustment of Hopper Wall Vibrator

2017-02-06


When you select any kinds of hopper wall vibrator,there is a very important thing you should know:Although you can calculate the natural frequency of the material, silo and chute,but in practice the result are not the calculated value.
We can use tables and formula to choose the hopper wall vibrator’correct force,frequency and installation location,But "fine tuning",the optimal adjustment of hopper wall vibrator is in the actual test - adjustment.Experienced field engineers can quickly select the best type and installation location of hopper wall vibrator.
Because the hopper wall vibrator is waterproof and dustproof,so it can work in dusty or humid conditions;the overall size is small, the outlet and inlet are standard pipe thread, easy to connect installation;In order to adapt to different installation location, there are four mounting holes;
For applications like empty chute and hopper,it is recommended that hopper wall vibrator work intermittently.So that you may need to add a solenoid valve after the oil mist detector.Don't add the solenoid valve before the transformer and the oil mist modulator,because if you do this,will make the voltage regulator start every time,and after increasing pressure, the output can not get the pressure immediately,this will reduce the function of the hopper wall vibrator.Therefore we also suggest that you put the solenoid valves close to the hopper wall vibrator.
Further information,please click:www.pkmachinery.com