faq

What Should We Note When Fixed Belt Conveyors Arrive at Installation Site?

2016-10-07

fixed-belt-conveyor-installation

The quality of the structural components installing has a great influnce on the capability of the complete machine, so while installing, and please check the following precision.
1. The straight line degree of the center line of the frame work should not be grater than 5mm within any 25m. For the belt conveyor that can run reversiblely, installing precision should be improved because the possibility of its conveyer belt off tracking is greater.
2. While installing the tumbler, you can add a washer under the bearing block. Adjust the position of the tumbler in order to ensure the installing precision.
3. The working face of the rail should be on the same plane. The difference of elevation between the rail tops should not be over 2.0mm. The straight line degree of the track within 1m is 2..0 mm, within 25m it is 5.0mm and within the full length it is 15mm. The track deviation is ±2.0mm.
4. Installing rollers While installing, the upper surfaces of the rolls(except the rollers whose centre of gravity can be adjusted) should be on the same plane.
5. After installing all the clearing implements, the touch lenghth of the scraper blade should not be less than 85﹪of the conveyer belt.
Further information,please click:www.pkmachinery.com