There are several methods of changing the Ultrasonic Rotary Vibrating Screen Net(With Tight Net Tools).Now PK machinery will introduce it for you in detail.
1.Clean the mesh rack clearly, use clean soft cloth which is steeped in acetone to clean the bond interface.
2.To tile the stretched net ring on the clean flat surface,put the installing screen mesh on the screen mesh ring,tighten the lathedog,make the screen mesh is stretched on the net ring
3.Put the mesh rack on a platform.
4.Open the KD-504A glue, according to the mixing ratio of 2:1,mix A and B.Only mix the A and B when needed,they must be mixed fully,the mixed glue must be used up in half an hour.Then glue should be evenly spread on the screen rack.
5.Put the stretched net ring on screen mesh rack.(note:the upper net surface of the stretched net ring is put on the screen mesh rack downward.) Put the screw on the stretched net ring around evenly,and the pressure should be even all round so as the glue on the screen mesh rack can permeate the mesh and till the glue is dry completely(in constant temperature environment, 12 hours are need).
6.First loose the screw,then loose the lathedog,take the stretched net ring,you can use it.