Sidewall conveyor belt is widely used in material handling industry. It has a lot of advantage, higher transportation capacity, the material is not easy to leak, slide prevention etc,

the belt abrasion can be divided into working surface abrasion,non-working surface and edge abrasion,if adopt corresponding measure to reduce the abnormal abrasion,it can extend belt service life,at the same time,it also save much maintenance cost.

In order to resolve the malfunction of belt deviation, conveyor belt manufacturer & end user should pay attention to the accuracy of installation dimensions and routine maintenance of equipment.

Screw conveyor not only transports material horizontally and obliquely, but also completes the operation of mixing and cooling at the same time. It mainly consists of spiral body, trough, driving device, bearing assembly and sealing arrangement, etc.

the vertical screw conveyor docking will also be able to successfully complete the new and old production line connection in the case of not affecting the normal production of old line,will achieve good economic benefits.

There will be some question during running of screw conveyor,this article summarize the Analysis of common faults for screw conveyor.

There are two important aspects on the screw conveyor, one is types of screw conveyor and its application, the second is how to avoid material blocking.

Drive device of sidewall belt conveyor a. Turn the input shaft of gear reducer by hand to check whether it rotates flexibly and has abnormal condition, and resolve the malfunction timely. b. Check whether the lubricating grease or oil is injected into gear reducer.

When the belt is running, the straps wheel will reduce the friction damage, increase the service life of the sidewall, and extend the service life of the whole sidewall belt conveyor.

In order to transport materials in a large angle or even vertically, it will usually use corrugated sidewall conveyor belt, also known as the large angle belt conveyor, it is reliable, but sometimes there is a problem of broken shaft.