faq
  • 2014-08
    Minor problems can be solved without consulting a specialist. Below is a list of the more common problems with their possible causes and remedies.
  • 2014-08
    Selection Procedure for Standard Bucket Elevator
  • 2014-08
    How to Observe the System Running
  • 2014-08
    Four basic malfunctions that bring attention to vibratory feeders need to be concern: 1.Declining feed rate due to low amplitude. This will occur gradually over a period of time. 2.A dead spot in the bowl – parts will not feed past a certain point in the bowl, even though they are moving elsewhere in the bowl. 3.Intermittent operation. The feeder will spontaneously run at excessive amplitude or possibly no amplitude without apparent cause. Included in this category is for a feeder not to work at all. 4.Noise from the vibrating feeder.
  • 2014-08
    Relationship between Vibration Amplitude and Materials Size
  • 2014-08
    Conveyor Components Locations and Terminology
  • 2014-08
    Conveyor belt is used to transfer materials from one place to another without using any manpower. However, it requires regular maintenance. Most of us think that maintaining the conveyor belts and get rid of the dirt, debris, loose material and contaminants would require more manual labor and increases costs.
  • 2014-08
    The conveyor should be turned on and run empty. The purpose of this is to run the conveyor while running empty to check for any tracking problems, the system will need to be inspected under running conditions when loaded, because empty belts and loaded belts do not necessarily track the same way.
  • 2014-08
    The maintenance schedule for any conveyor can be divided into three stages: 1. Belt shut down and empty 2. Belt running empty 3. Belt running loaded
  • 2014-08
    Plate chain bucket elevator is a ring chain type which adopts the model of centrifugal unloading and dig-loading. Its traction mechanism is two circular chains. In Henan Pingyuan, this series is suitable for vertical conveying of the materials with the bulk density less than 1.5 t/m3. The powdery and granular materials are easy to dig, and the small lump materials have low abrasiveness such as coal, cement, gravel, sand chemical fertilizer, grain and etc. Besides, it can convey the materials with the temperature below 250oC. Bucket elevator is widely used in many industries for lifting powder,
 784   Home Previous 70 71 72 73 74 75 76 77 78 79 Next Last