faq
  • 2014-08
    This device is designed and built with the capability to compensate for these operational length changes as well as to take up the belt length for the required initial tension.
  • 2014-08
    In order to avoid an unsafe or hazardous condition, the conveyor assemblies and components must be installed with the following minimum conditions.
  • 2014-08
    The screw conveyor is one of the oldest methods of conveying materials known to mankind with the original design dating back to more than two thousand years. Since the screw conveyor came into general use a little over a century ago for moving grains, fine coal and other bulk material of the times, it has come to occupy a unique place in a growing area of material handling processing.
  • 2014-08
    1.General Inspection Routine periodic inspection of the entire conveyor must be established to ensure continuous maximum operating performance. Keep the area around the conveyor and its drive clean and free of obstacles to provide easy access and avoid functional interference of components. 2.Power Lock Out Lock out power to the motor before attempting any maintenance. Use a padlock and tag on the drive’s controls. Do not remove padlock or tag, nor operate conveyor, until all covers and guards are securely in place. 3.Removing Screw Sections Screw sections are typically removed starting w
  • 2014-08
    Maintenance of Vibration Motors of the Linear Vibrating Screen
  • 2014-08
    Maintenance of Bucket Elevator 1. CHECK BELT FOR TEARS, CUTS, ETC. Sudden signs of unusual damage call for immediate action. 2. CHECK CUPS FOR LOOSE OR MISSING BOLTS A loose dangling cup is the necessary lever to start a busted belt rip. 3. REPLACE BELT CUPS Cups with a pronounced forward bend hold the belt in a vertical arc, which is a contradiction of forces. When the belt is bent in a horizontal arc around the pulleys, this will cause lengthwise cracks to appear at the bolt holes. 4. CHECK BELT TENSION This is a possible source of drive slippage and excessive wear. Belts r
  • 2014-08
    Factors that need to take note when planning the intake to feed material into Bucket Elevator
  • 2014-08
    Primary considerations for the selection of a screw conveyor
  • 2014-08
    Warning and Safety Reminders for Screw and Bucket Elevator Conveyors
  • 2014-08
    Linear vibrating screen is widely used in several industries such as mining industry, chemical industry, food industry, fertilizer industry etc