Operation tips for Belt Bucket Elevator


1. The operation of belt bucket elevator (the transport material characteristics, working conditions, throughput, etc.), shall comply with the instructions specified; super large and super viscous material can not be available.
2. Please feed the vertical belt bucket elevator evenly, and shall comply with the lifting transmission capacity range. Material can not be fed too much, to prevent the blocking materials in the lower part of the section.
3. All inspection doors of cement belt bucket elevator must be closed. Fault occurred in the working process should immediately stop operation to eliminate the fault. If not eliminated immediately and to work without influence of defects should be recorded, maintenance to be eliminated.
4. The supervisor should often observe to enhance the operation of each part of the bucket elevator conveyor, check the connection bolts and tighten at any time.
Hope above mention tips are helpful, PK Machinery is a professional manufacturer of bucket elevator, screw conveyor, belt conveyor, scraper conveyor and vibrating screen. Further information, please click: www.pkmachinery.com